X stand chair stand with dimensions marked, 210cm tall with a 110cm by 110cm base
  • X stand chair stand with dimensions marked, 210cm tall with a 110cm by 110cm base
  • X stand from the side showing the curved upright and crossed base
  • X stand chair stand, front view
  • X stand chair stand, angled view
  • Close up of the crossed base tubes of the X stand on a wooden floor
  • X stand details: crossed base, top hook with carabiner, tube joints and thumb screw
  • X stand fittings: thumb screws, spanner, carabiner, bolt and nut
  • X stand tubes and fittings laid out before assembly
  • Example swings follow, swings not included
  • Hanging egg chair on the X stand in a living room, demo only
  • Child in a red wrap swing on the X stand in a playroom
  • Blue wrap therapy swing hanging from the X stand indoors
  • Blue wrap swing on the X stand, side view
  • Blue and green pod chair on the X stand
  • White rope hammock chair on the X stand
  • Cream hammock chair with spreader bar on the X stand
$184.95
RRP: $199.95 (You save $15)
Pay With Paypal
Quick Summary
  • Strong and Sturdy
  • Suits Certain Hammock Chairs and Swings
  • Capacity: 120kg
  • Height: 2.1m
  • Base: 1.1x1.1m

X Stand: Chair Stand

 (as pictured)
In stock, secure payment
Item Description
Made from weather resistant power-coated steel, this stand can fit a range of hammock chairs and swings (most hammock chairs, except especially long ones, plus pod swings and wrap swings) and doesn't take up too much space.

The stand measures 110x110cm at the base and is 210cm tall. The weight limit is 120kg and it is stable enough to support gentle/light swinging.

Important Note: The stand includes 1 carabiner at the top. If you'd prefer to have 2 carabiners and a chain, for adjusting the chair up and down, then please add it in the dropdown above. If ordering the extra chain and carabiner, they'll be delivered separately.

Chairs/Swings Not Included

Note for TAS, WA, NT: This item has a heavy item surcharge for orders to TAS, WA and NT. If this applies to you, please add the surcharge through the drop-down above the order button.

Safety and care for swing stands

  • Set the stand on a flat surface, clear of toys and anything a child could bump into or trip on. Grass or matting is safer than a hard floor.
  • Double check that every bolt and connection is tight, then adjust the chain or straps so the swing hangs at a height that is easy to get on and off.
  • The X-Stand, U-Stand and tripod are for sitting or gentle swinging. Strong swinging belongs on a swing set stand with a wider base. If the swing is rated lower than the stand, the swing's limit applies.
  • Keep an eye out for sliding, leg lifting or tipping. Noting such would mean needing to take extra care not to swing overly strongly, and you may consider fixing the stand down, eg. our Spiral Pegs into dirt or grass, or adding weights to the base, such as Velcro sandbags from eBay.
  • When spinning from a single point, put a swivel between the carabiners so the rotation is smoother and puts less force on the stand.
  • On soft ground, peg or sandbag the legs; indoors, use floor protectors under the feet.
  • The stands are powder coated for weather, but give them some cover over long periods outside, and bring the swing in when it is not being used.

Full hanging guide: How to hang a sensory swing: ceiling, beam, tree or stand.

Specifics
Weight Capacity120kg
Height2.1m
Base1.1x1.1m
Weight15kg
What's IncludedStand, 1x Carabiner
Purchase Protection6 Months
Support7 Days per Week
Assembly and Safety ManualsX-stand-manual.pdf
Optional Accessory Details
Extra Chain and CarabinerExtra Chain and Carabiner
...More Details
Premium Swivel and Large CarabinersPremium Swivel and Large Carabiners
This is a premium swivel with 2x large carbiners. It helps to allow for the smoothest spinning. It has 2 matching carabiners...More Details
Related Products